Crude Oil Refining Production Line /Peanut Walmut Oil Refining Machine

• Customization: Available
• After-sales Service: Quality Assurance
• Warranty: 1 Year
• Model NO.: CDS
• Structure: Horizontal
• Press Series: Fourth
• Voltage: 380V
• Capacity: 1000t/D
• Power Consumption: 28kwh/T Max
• Core Componets: Motor,Pressure Vessel,Pump,Plcgear,Bearing
• Raw Mwteria: Soybean,Sunflower,Sesame,Copra,Mustard
• Oil Type: Soybean Oil
• Transport Package: Container
• Specification: CDS
• Trademark: chidan
• Origin: China
• HS Code: 84792000
• Production Capacity: 800 Sets/Year

Product Description

 Oil Processing Machine Vegetable Oil Refinery 

 

Capacity: 10T-1000T/D
Oilseeds scope: Soybean, rice bran, peanut, sesame, sunflower seed, rapeseed, cottonseed, corn germ, copra,
castor bean and so on.

Alkali	Oil acid valuex1-3kg/T oil
Refining rate	1-refining consumption
Water (soften water)	150Kg/T oil
Phosphoric acid	2~3 kg/T oil
Steam consumption	700KG/T oil
Circulating water cooling water yield	150M3/H
Bleaching earth consumption	3-5Kg/T oil
Waste bleaching earth oil content	≤25~35%
Refining losses	Acid valuex1.2 (chemical refining) Acid valuex 0.6 (physics refining)
Bleaching losses	The quantity of bleaching earth×0.25%
Electric consumption	28Kwh/T oil
Deodorization loss consumption	≤0.5%

The pretreatment 

Cleaning: Remove most impurities from the material, such as stones, dirt, etc., to prepare for the next crushing
process, improve crushing efficiency and extend machine life.

Crushing: After the crushing process, the material is broken into small pieces, which improves the efficiency of
the material being pressed.
Softening process: Increase the moisture content and temperature of the material, and ultimately increase the
final oil output of the material.
Flaking process: The material is pressed into pieces in this process to increase the amount of oil discharged
from the material.
Extruder: The treated oil enters the squeegee from the hopper. Under the condition of high pressure, the
embryo is continuously pushed inward by the screw press, and is pressed to finally produce oil.




The Extraction Process


Extraction: It usually adopt an organic solvent that can dissolve the oil, through the material spray, soak, so that
the oil will be extracted from the oil-bearing seeds.
DTDC: By continuously the multi-layered steam heating, the heat obtained by the solvent in the wet mash is
vaporized, thereby separating the solvent from the wet meal, and removing the solvent remaining in the wet
meal as much as possible.
Evaporation: The difference between the boiling point of the oil and the solvent is used to separate the solvent
and the oil.
Stripper: The separated solvent can be dissolved in the selected paraffin or solvent and recovered.


The refining Process
A general term for a series of processes for removing solid impurities, free fatty acids, phospholipids, gums,
waxes, pigments, odors, etc. contained in vegetable oils. Enhancing the nutritional value of edible oils has great
benefits for human health.

Deacidification and Degumming: This step is mainly to remove the excess acid in the grease.
Decolorization: The decolorization process greatly enhances the oxidation stability of the oil, and this process
also has a great influence on the subsequent deodorization process of the oil.
Deodorization: Deodorization of oil and fat not only removes odor substances in oil, but also improves the safety
of oils and fats.
Filteration: Miscella mixed by oil and clay from bleaching tower is pumped into decolorizing filter.
Dewaxing process: Bleached oil enter into crystallizing tank through heat exchanger and begin the cooling
crystallization process.

Installlation Site

 

FAQ

 

Q:Are you a manufacturer or a foreign trade company?
A:We are a manufacturer.

Q:What if I could not operate this product?
A:Our machine operation video and manual are for your reference. If necessary, we will send engineers to train for you
personally.

Q:Can you provide more information about production and quote the best price?
A:Of course, but first we have to confirm your needs. According to your needs, we will choose the right product for your
reference. When we determine one or several products, we will quote you the best price.

Q:How to place an order?
A:First send us the inquiry below, including the device name, daily production, work hours, main processing materials,
etc., then our sales manager will send you the information for your reference.

Q:How long does it take to receive my product?
A:It is not yet possible to determine the time because the shipping distance and production cycle are uncertain.our
business manager will recommend the appropriate transportation route for you to ensure safe and fast delivery of
the goods.

Q:How is the quality of your products guaranteed?
A:After the completion of production, our quality inspection can not test the product. If you need it, we can provide
third-party testing service to ensure the stable production of the equipment.