Oilseeds Steam Cooker for Oil Press Factory
Vertical Cooker Introduction
The vertical cooker is a continuous equipment used for wetting and cooking of the oil seeds flakes from the flaking roll. Using the oil seeds steam cooker can meet the requirement of pressing and solvent extraction process, increase the oil yield and improve the quality of oil and cake. The machine can also be used as softening kettle to soften the crushed oil seeds to increase the flaking quality. Vertical cooker adopts steam or heat conduction oil as the heat source. The diameter can be 1.2 m, 1.5 m, 1.8 m, while the number of layers can be 3, 4 or 5. It's ideal continuous oil seeds softening and cooking equipment in medium and large oil processing plant.
Features of 0il Seeds Steam Cooker
1. Large handling capacity, small land occupation, low power consumption, convenient operation.
2. Each layer of the vertical steam cooker has an access door for convenient maintenance.
3. The gearbox of the oil seed cooker has a stable drive, low noise, and long service life.
4. Fast temperature rising, the temperature and moisture are easily adjusted.
5. The oil seeds steaming cooker has a good cooking effect.
6. The vertical cooker is suitable for cooking peanut, sesame, copra, sunflower seed, rapeseed, cottonseed, camellia seed, soybean, corn germ, etc.
Structure of Oil Seeds Steaming Cooker
The vertical cooker is superposed by 3, 4 or 5 layers of single layer steam pot. The oil seed cooker is mainly composed of a pot body, steam line, vapor exhaust pipe, stirring device, automatic charging door, and transmission system.
1. Each layer of steam pot has side jacket and bottom jacket. Indirect steam is introduced into the jackets to heat the materials. The steam is adjusted by the valve at each layer to control the material temperature.
2. Each layer has a pair of stirring scrapers which can ensure uniform cooking effect. The scrapers are driven by the vertical shaft which is connected to the motor through the speed reducer and coupling.
3. The direct steam nozzle at the top layer sprays the direct steam uniformly into the materials to control the moisture content.
4. Each layer of steam pot has a vapor exhaust device to eliminate the water evaporated during the cooking process.
5. There is a pointer at the outside of each layer to indicate the height of the material layer. The automatic charging door at each layer can control the material charging. The bottom layer has an adjustable discharge door.
Technical parameters
| Model Size |
YZCL150*5 |
YZCL180*5 |
YZCL200*5 |
YZCL210*5 |
YZCL220*5 |
YZCL250*5 |
YZCL300*5 |
| capacity |
1.0-1.3t/h |
1.5-2.Ot/h |
2.5-3.0t/h |
2.5-3.0t/h |
3.0-3.5t/h |
4.0-5.0t/h |
5.0-6.5t/h |
| Inner diameter of cooker body |
1500mm |
1800mm |
2000mm |
2100mm |
2200mm |
2500mm |
3000mm |
| Layers |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
| Spindle speed |
33r/min |
33r/min |
33r/min |
33r/min |
30.5r/min |
24r/min |
24/min |
| Work rate |
15kw |
18.5kw |
22kw |
22kw |
30kw |
37kw |
45kw |
| Motor model |
Y180L-6 |
Y200LI-6 |
Y200LI-6 |
Y200LI-6 |
Y225LI-6 |
Y250M-6 |
Y280S-6 |
| Reducer type |
ZLS-1:30 |
ZLS-1:30 |
ZLS-1:30 |
ZLS-1:30 |
ZLS-1:30 |
ZLS-1:40 |
ZLS-1:40 |
| speed ratio |
1:30 |
1:30 |
1:30 |
1:30 |
1:30 |
1:30 |
1:30 |
| Heating area |
14.6 sqm |
19.7 sqm |
23.6 sqm |
25.6 sqm |
27.6 sqm |
35 sqm |
48 sqm |
| The highest steam gauge |
0.7MPa |
0.7MPa |
0.7MPa |
0.7MPa |
0.7MPa |
0.7MPa |
0.7MPa |
| Body full height |
4710mm |
4710mm |
4710mm |
4710mm |
4150mm |
4850mm |
4850mm |
| Machine weight |
6000kg |
7000kg |
7300kg |
8000kg |
10000kg |
13000kg |
17000kg |
Operation of Oil seed Cooker
1. Before starting the machine, check each layer of the oil seeds steaming cooker and remove the debris. Adjust the charging door to the required position. Usually, the material amount in the first and second layer should not be less than 80% of the pot volume, in order to achieve the aim of cooking. The material amount in the rest layers is about 40%, which is convenient for eliminating the water during the drying process.
2. Start the motor for idle running. Check whether the operation of the vertical steam cooker is normal.
3. Open the condensate valves to drain the condensate in the side jackets and bottom jackets. Open the steam inlet valves slowly to preheat the pot. Close the charging door at each layer. Feed the materials and spray the direct steam.
2. When the material level in the first layer reaches the preset height, open the charging door to charge the material slowly to the second layer.Then charge the material layer by layer till the last layer of the oil seeds steam cooker. By this time the automatic charging door at each layer starts to work normally. Check the temperature and moisture content of the discharged materials and adjust in time according to the
technological requirements.
5. When stopping the machine, stop feeding the materials first and empty the materials at each layer. Meanwhile, close the steam inlet valves. Finally, stop the motor of the vertical steam cooker.
3. In case of an emergency shut down, stop the motor immediately, stop feeding the materials and close the steam inlet valves, and then empty the materials from the access door.
Why Choose Chidan Equipments
Partial representative items
About US
Shanghai Chidan Technology & Engineering Co. Ltd is located in the biggest city of China, Shanghai, which is the economic and financial center of China.
We are in the field of researching in the most advanced technology of the machinery processing, manufacturing all types of grain & cereals & oil processing machine, selling and exporting self-made machines as well as other related machinery with the customers' request. We have good teams in production, sales and after sales service, to guarantee the satisfaction from our clients both in quality and service.
We have been researching several kinds of cereals cleaning machine, flour milling machine, edible oil processing machine for more than ten years.
Our machinery has been exported to the whole world directly or indirectly, such like India, Vietnam, Malaysia, Indonesia, Philippine, Russia, Ukraine, Greek, Bulgaria, Ethiopia, Sudan, Chad, Sierra Leone, Tanzania, Nigeria and so on.
Our factory mainly engages in the developing, manufacturing, installation and service of grain and oil equipment.
In which, dust removal equipment won China's famous brand product in 2018.
Graining cleaning line can clean all types of grains, main function is to remove the dust and impurity inside the grains to reach the further processing demand. These grains are wheat, green-mung beans, soybean, sunflower seeds, peanut, sesame, chick peas, pigeon peas, water melon seeds, coffee beans and so on.
Our corporate culture is 'Excellent Products, Excellent Service, Customer First'. We believe trust is the most precious thing in the world. Give us the trust, we will bring you plenty of surprises.
Welcome to our company at any time.
Audited Supplier 
){kind=link}